1. Double check the monitor has been switched on by pressing the power button on the front of it. (they should always be turned off when you leave the studio).

2. Wiggle & click (once) the mouse. It might just be asleep! (However the Myriad PC is set not to go to sleep).

3. Is there a power light on the monitor?

YES – then it’s probably not a power issue, go to 2).
NO – try the ON button again.

If it still doesn’t work then just check that the power lead behind the monitor hasn’t accidentally pulled out slightly. It should be in fairly firmly. Unplugging and replugging in may help to reseat it better. If that doesn’t work, contact report the issue on RV:INSIDE or engineering@radioverulam.com

4. Is the light Yellow/Green or Orange?

Yellow/Green

Orange – the monitor is on but not getting a signal.
Press …….. To open the ‘source menu’ and check it is set to ‘VGA’. If it is set to VGA then the issue is likely with the PC or KVM (keyboard/video/mouse).

Unplug the power to the KVM extender box, wait 20 seconds and re-plug the power in.

If that doesn’t work, contact report the issue on RV:INSIDE or engineering@radioverulam.com – we may be able to log in remotely to check the PC is still on.